Primer Selio latecs Acrylig Uwch diwydiant diwydiant Mit-eiddew gyda phŵer treiddiol rhagorol
Cais
Mae ganddo adlyniad rhagorol i swbstradau dur a phreimiau dŵr tebyg, ac eiddo ffisegol a mecanyddol rhagorol ar ôl i'r don baent sychu.
5. Mae gan y ffilm baent gadw golau rhagorol a chadw lliw ar ôl sychu.
Cymhwyso a argymhellir Mae'n addas ar gyfer amddiffyn draeniau, rhannau peiriannau, offer diwydiannol ysgafn, ac ati lle mae angen amddiffyniad uchel.
Data technegol Lliw amrywiol
Arwyneb sych (50% hygrededd) 15 ℃ C <1h ； 25'C <0.5h
Sych sych (lleithder 50%) 15'C <48h; 25 ° C <24h
Trawiadau "kg.cm" 50
Nid yw ffilm paent dŵr (50 ± 5μm) 72h yn pothellu, nid yn helpu i gwympo, nid yn rhydu.
Caledwch 0.3 (pendil dwbl) eiddo mecanyddol yn profi trwch ffilm (23 ± 3jμm)
Gludiad (Hegelian) Lefel 1
Trin wyneb Dylai arwyneb y deunydd â gorchudd fod yn rhydd o leithder, olew, carbon asid ac ynn.
Manylion Cyflym
Dur â chroen ocsid: Dylai dulliau ffrwydro ergydion neu ffrwydro tywod fel prosesu i lefel Sa2.5, lle na ellir ffrwydro tywod gael eu sgleinio'n fecanyddol neu
Wedi'i drin yn gemegol i gael gwared ar yr holl ysgwyddau toredig sy'n arnofio.
Dur heb groen ocsid: wedi'i siapio â thywod (wedi'i saethu â llun) i Sa2.5 neu offer malu trydan wedi'u actifadu gan aer i St3.
Weldio, torri fflam neu gywiro tân gwyllt ardaloedd bwa llosg: malu i lefel St3.
Sylfaen deunydd gyda hen ffilm paent: tynnwch hen ronynnau paent a rhwd rhydd, a thywod i St3 gydag offer sandio aer neu drydan.
Gellir defnyddio pecyn paentio nodweddiadol gyda primer wedi'i seilio ar ddŵr H902, neu ei ddefnyddio ar ei ben ei hun fel topcoat addurniadol cyffredinol, neu ei ddefnyddio gyda mathau eraill o gynhyrchion primer (mae angen eu paru i'w gwirio).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
